Solar Energy Auto Flash LED Car Wheel Hub Tire Tyre Valve Cap Light Lamp

৳  3,000

Bullet Point:

  • Solar energy automatically charge, the product uses high-efficiency solar cells.
  • Built-in lithium battery, the product uses large-capacity lithium battery, no memory effect, longer life.
  • Ultra-high brightness, the product adopts super bright imported chip LED, and the night driving has wide warning and decorative effect.
  • Intelligent opening function, the product adopts light control and micro-vibration sensing system, which automatically turns on when driving at night.
  • Intelligent shutdown function, the product adopts single-chip microcomputer, there is a delay to close the system, and it will automatically close after 30 seconds of parking or vehicle stationary state.

Specifications:

  • Material: PC
  • Color: As pictures show
  • Applicable models: universal type

Package Included:

  • 1 x Tyre Valve Cap Light

Installation Notes:

  • 1. Use a small slotted screwdriver to remove the original wheel hub.
  • 2. Use a caliper or a common measuring tool to measure the diameter of the original cars leg diameter.
  • 3. Use a screwdriver to loosen the pin diameter positioning screw of the product.
  • 4. Adjust the required diameter according to the original measured diameter of the card foot. The four feet need to be adjusted at the same time to keep the center of the four feet of the product symmetrical. After the adjustment is completed, tighten the screw.
  • 5. Use a caliper or a common measuring tool to measure the height of the original cars leg height.
  • 6. Install the positioning buckle according to the original measured height of the card foot, and the four positioning buckles maintain the same height.
  • 7. The circlip is clamped on the inner side of the four feet to the middle of the two feet to ensure the flexibility of the foot.
  • 8. Push the product into the original car position of the wheel hub.
  • 9. Cover the light, press and hold the switch for 3 seconds to turn on the product, and the whole installation is complete.